Piping Division

Piping Division

piping is a system of pipes used to convey fluids (liquids and gases) from one location to another. The engineering discipline of piping design studies the efficient transport of fluids an elevated temperature

  • Seamless Pipes

    Seamless pipe is formed by passing a solid billet with a mandrel through a metal bar that is at an elevated temperature

  • LSAW Welded Pipes

    The Longitudinally Submerged Arc Welding (LSAW) is produced by using a single plate as a raw material, pressing (rolling) the steel plate into a pipe blank in a mold or a molding machine, and adopting double-sided submerged arc welding and expanding the diameter

  • ERW / HFW Welded Pipes

    High frequency welded pipe is based on solid resistance heat energy. Resistor thermal welding, using high-frequency current is generated in the workpiece so that the surface of the workpiece weld zone is heated to the melting or close to the plastic state, then applied (or not applied) upsetting force is achieved for such a steel pipe of the metal combination

  • Manual Valves

    Manual valves are primarily used to stop and start the flow (block or on-off valves), although some designs can be used for basic manual throttling

  • flange

    A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system

  • Actuated Valves

    A valve actuator is the mechanism for opening and closing a valve

  • Insulating Joints

    Corrosion control of pipes by cathodic protection in the field of fluids transferring (e.g. petroleum and gas) is of a very special importance, but there are some industries which no need to such these protection but to need being electrical insulated

  • gasket

    A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression. Gaskets allow for ``less-than-perfect`` mating surfaces on machine parts where they can fill irregularities

  • fastener

    A fastener or fastening is a hardware device that mechanically joins or affixes two or more objects together. In general, fasteners are used to create non-permanent joints; that is, joints that can be removed or dismantled without damaging the joining components. Welding is an example of creating permanent joints

  • Coating & Wraps

    Pipe wrap is resin-impregnated fiberglass or PVC tape used for surface protection. It is easy to use, cost-effective, and durable in pipe repair. It repairs pipe leaks and protects moisture ingression, corrosion, and abrasion